学术文献库

Underlying the rapidly increasing photovoltaic efficiency and stability of metal halide perovskites (MHPs) is the advance in the understanding of the microstructure of polycrystalline MHP thin film. Over the past decade, intense efforts have aimed to understand the effect of microstructure on MHP properties, including chemical heterogeneity, strain disorder, phase impurity, etc. It has been found that grain and grain boundary (GB) are tightly related to lots of microscale and nanoscale behavior in MHP thin film. Atomic force microscopy (AFM) is widely used to observe grain and boundary structures in topography and subsequently to study the correlative surface potential and conductivity of these structures. For now, most AFM measurements have been performed in imaging mode to study the static behavior, in contrast, AFM spectroscopy mode allows us to investigate the dynamic behavior of materials, e.g. conductivity under sweeping voltage. However, a major limitation of AFM spectroscopy measurements is that it requests manual operation by human operators, as such only limited data can be obtained, hindering systematic investigations of these microstructures. In this work, we designed a workflow combining the conductive AFM measurement with a machine learning (ML) algorithm to systematically investigate grain boundaries in MHPs. The trained ML model can extract GBs locations from the topography image, and the workflow drives the AFM probe to each GB location to perform a current-voltage (IV) curve automatically. Then, we are able to IV curves at all GB locations, allowing us to systematically understand the property of GBs. Using this method, we discover that the GB junction points are more photoactive, while most previous works only focused on the difference between GB and grains.