论文标题

基于总元件动力探测器的角耦合毫米波片上光谱仪

A horn-coupled millimeter-wave on-chip spectrometer based on Lumped Element Kinetic Inductance Detectors

论文作者

Chowdhury, Usasi, Levy-Bertrand, Florence, Calvo, Martino, Goupy, Johannes, Monfardini, Alessandro

论文摘要

语境。毫米波天文学是通用天体物理学研究和宇宙学的重要工具。在大型望远镜上运行的大量视野连续仪器正在检测到大量未知来源。 目标。需要新的智能焦点平面,以弥合在单盘望远镜上运行的大带宽连续仪器与高光谱和角度分辨率干涉仪(例如智利的Alma,法国的Noema)。目的是进行低中等光谱分辨率观测值,并选择较低数量的潜在有趣的来源,即高红移星系,以进一步随访。 方法。我们已经设计,制造和测试了85-110〜GHz范围内的创新片上光谱仪。它包含16个通道,每个通道选择一个约为0.2 GHz的频带。锥形角天线耦合到接地平面的插槽,收集辐射并将其引导到位于单晶基板另一侧的MM波微带传输线上。 MM波线耦合到过滤器银行。每个滤波器电容耦合到集总元件动力电感检测器(Lekid)。微带构型允许从高质量(即低损失,单晶基板)中受益,同时也可以防止直接,即未经过滤的lekid照明。 结果。原型光谱仪表现出光谱分辨率r = lambda / delta_lambda = 300。光学噪声等效功率在低1E-16W / SQRT(Hz)范围内,输入功率约为0.2pw。该设备对极化敏感,最佳通道的交叉极化低于1%。

Context. Millimetre-wave astronomy is an important tool for both general astrophysics studies and cosmology. A large number of unidentified sources are being detected by the large field-of-view continuum instruments operating on large telescopes. Aims. New smart focal planes are needed to bridge the gap between large bandwidth continuum instruments operating on single dish telescopes and the high spectral and angular resolution interferometers (e.g. ALMA in Chile, NOEMA in France). The aim is to perform low-medium spectral resolution observations and select a lower number of potentially interesting sources, i.e. high-redshift galaxies, for further follow-up. Methods. We have designed, fabricated and tested an innovative on-chip spectrometer sensitive in the 85-110~GHz range. It contains sixteen channels selecting a frequency band of about 0.2 GHz each. A conical horn antenna coupled to a slot in the ground plane collects the radiation and guides it to a mm-wave microstrip transmission line placed on the other side of the mono-crystalline substrate. The mm-wave line is coupled to a filter-bank. Each filter is capacitively coupled to a Lumped Element Kinetic Inductance Detector (LEKID). The microstrip configuration allows to benefit from the high quality, i.e. low losses, mono-crystalline substrate, and at the same time prevents direct, i.e. un-filtered, LEKID illumination. Results. The prototype spectrometer exhibit a spectral resolution R = lambda / Delta_lambda = 300. The optical noise equivalent power is in the low 1E-16W/sqrt(Hz) range for an incoming power of about 0.2pW per channel. The device is polarisation-sensitive, with a cross-polarisation lower than 1% for the best channels.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源