论文标题
梁仪器的模拟电子设备
Analog electronics for beam instrumentation
论文作者
论文摘要
梁仪器中模拟前端电子设备的任务是优化仪器传递的信号的有用信息内容。它必须抑制不会导致测得数量的信号组件。它必须过滤以将界限放在带宽和可能的动态范围上，以放大随后的处理阶段的需求。它必须最大程度地减少噪声，拒绝干扰并将信号与传输媒体和数字采集设备相匹配。由于电路通常必须在放射性区域运行，因此重音是用被动电子设备。
The task of analog front-end electronics in beam instrumentation is to optimize the useful information content of the signal delivered by an instrument. It must suppress signal components that do not contribute to the measured quantity. It must filter to put bounds on bandwidth and possibly dynamic range, to relax the demands made of subsequent processing stages. It must minimize noise, reject interference and match the signal to transmission media and digital acquisition equipment. Since the circuitry must often operate in radio-active areas, the accent is on passive electronics.
